pub struct Take<T> { /* private fields */ }
Expand description
Implementations§
source§impl<T> Take<T>
impl<T> Take<T>
sourcepub fn limit(&self) -> u64
pub fn limit(&self) -> u64
Returns the number of bytes that can be read before this instance will return EOF.
§Note
This instance may reach EOF
after reading fewer bytes than indicated by
this method if the underlying Read
instance reaches EOF.
§Examples
use std::io;
use std::io::prelude::*;
use std::fs::File;
fn main() -> io::Result<()> {
let f = File::open("foo.txt")?;
// read at most five bytes
let handle = f.take(5);
println!("limit: {}", handle.limit());
Ok(())
}
Run1.27.0 · sourcepub fn set_limit(&mut self, limit: u64)
pub fn set_limit(&mut self, limit: u64)
Sets the number of bytes that can be read before this instance will
return EOF. This is the same as constructing a new Take
instance, so
the amount of bytes read and the previous limit value don’t matter when
calling this method.
§Examples
use std::io;
use std::io::prelude::*;
use std::fs::File;
fn main() -> io::Result<()> {
let f = File::open("foo.txt")?;
// read at most five bytes
let mut handle = f.take(5);
handle.set_limit(10);
assert_eq!(handle.limit(), 10);
Ok(())
}
Run1.15.0 · sourcepub fn into_inner(self) -> T
pub fn into_inner(self) -> T
Consumes the Take
, returning the wrapped reader.
§Examples
use std::io;
use std::io::prelude::*;
use std::fs::File;
fn main() -> io::Result<()> {
let mut file = File::open("foo.txt")?;
let mut buffer = [0; 5];
let mut handle = file.take(5);
handle.read(&mut buffer)?;
let file = handle.into_inner();
Ok(())
}
Run1.20.0 · sourcepub fn get_ref(&self) -> &T
pub fn get_ref(&self) -> &T
Gets a reference to the underlying reader.
§Examples
use std::io;
use std::io::prelude::*;
use std::fs::File;
fn main() -> io::Result<()> {
let mut file = File::open("foo.txt")?;
let mut buffer = [0; 5];
let mut handle = file.take(5);
handle.read(&mut buffer)?;
let file = handle.get_ref();
Ok(())
}
Run1.20.0 · sourcepub fn get_mut(&mut self) -> &mut T
pub fn get_mut(&mut self) -> &mut T
Gets a mutable reference to the underlying reader.
Care should be taken to avoid modifying the internal I/O state of the
underlying reader as doing so may corrupt the internal limit of this
Take
.
§Examples
use std::io;
use std::io::prelude::*;
use std::fs::File;
fn main() -> io::Result<()> {
let mut file = File::open("foo.txt")?;
let mut buffer = [0; 5];
let mut handle = file.take(5);
handle.read(&mut buffer)?;
let file = handle.get_mut();
Ok(())
}
RunTrait Implementations§
source§impl<T: BufRead> BufRead for Take<T>
impl<T: BufRead> BufRead for Take<T>
source§fn fill_buf(&mut self) -> Result<&[u8]>
fn fill_buf(&mut self) -> Result<&[u8]>
Returns the contents of the internal buffer, filling it with more data
from the inner reader if it is empty. Read more
source§fn consume(&mut self, amt: usize)
fn consume(&mut self, amt: usize)
Tells this buffer that
amt
bytes have been consumed from the buffer,
so they should no longer be returned in calls to read
. Read moresource§fn has_data_left(&mut self) -> Result<bool>
fn has_data_left(&mut self) -> Result<bool>
🔬This is a nightly-only experimental API. (
buf_read_has_data_left
#86423)Check if the underlying
Read
has any data left to be read. Read moresource§fn skip_until(&mut self, byte: u8) -> Result<usize>
fn skip_until(&mut self, byte: u8) -> Result<usize>
🔬This is a nightly-only experimental API. (
bufread_skip_until
#111735)Skip all bytes until the delimiter
byte
or EOF is reached. Read moresource§fn read_line(&mut self, buf: &mut String) -> Result<usize>
fn read_line(&mut self, buf: &mut String) -> Result<usize>
Read all bytes until a newline (the
0xA
byte) is reached, and append
them to the provided String
buffer. Read moresource§impl<T: Read> Read for Take<T>
impl<T: Read> Read for Take<T>
source§fn read(&mut self, buf: &mut [u8]) -> Result<usize>
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
Pull some bytes from this source into the specified buffer, returning
how many bytes were read. Read more
source§fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<()>
fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<()>
🔬This is a nightly-only experimental API. (
read_buf
#78485)Pull some bytes from this source into the specified buffer. Read more
1.36.0 · source§fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>
fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>
Like
read
, except that it reads into a slice of buffers. Read moresource§fn is_read_vectored(&self) -> bool
fn is_read_vectored(&self) -> bool
🔬This is a nightly-only experimental API. (
can_vector
#69941)source§fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>
Read all bytes until EOF in this source, placing them into
buf
. Read moresource§fn read_to_string(&mut self, buf: &mut String) -> Result<usize>
fn read_to_string(&mut self, buf: &mut String) -> Result<usize>
Read all bytes until EOF in this source, appending them to
buf
. Read more1.6.0 · source§fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>
fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>
Read the exact number of bytes required to fill
buf
. Read moresource§fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<()>
fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<()>
🔬This is a nightly-only experimental API. (
read_buf
#78485)Read the exact number of bytes required to fill
cursor
. Read moresource§fn by_ref(&mut self) -> &mut Selfwhere
Self: Sized,
fn by_ref(&mut self) -> &mut Selfwhere
Self: Sized,
Creates a “by reference” adaptor for this instance of
Read
. Read moreAuto Trait Implementations§
impl<T> RefUnwindSafe for Take<T>where
T: RefUnwindSafe,
impl<T> Send for Take<T>where
T: Send,
impl<T> Sync for Take<T>where
T: Sync,
impl<T> Unpin for Take<T>where
T: Unpin,
impl<T> UnwindSafe for Take<T>where
T: UnwindSafe,
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more