Struct std::io::BufWriter

1.0.0 · source ·
pub struct BufWriter<W: ?Sized + Write> { /* private fields */ }
Expand description

Wraps a writer and buffers its output.

It can be excessively inefficient to work directly with something that implements Write. For example, every call to write on TcpStream results in a system call. A BufWriter<W> keeps an in-memory buffer of data and writes it to an underlying writer in large, infrequent batches.

BufWriter<W> can improve the speed of programs that make small and repeated write calls to the same file or network socket. It does not help when writing very large amounts at once, or writing just one or a few times. It also provides no advantage when writing to a destination that is in memory, like a Vec<u8>.

It is critical to call flush before BufWriter<W> is dropped. Though dropping will attempt to flush the contents of the buffer, any errors that happen in the process of dropping will be ignored. Calling flush ensures that the buffer is empty and thus dropping will not even attempt file operations.

§Examples

Let’s write the numbers one through ten to a TcpStream:

use std::io::prelude::*;
use std::net::TcpStream;

let mut stream = TcpStream::connect("127.0.0.1:34254").unwrap();

for i in 0..10 {
    stream.write(&[i+1]).unwrap();
}
Run

Because we’re not buffering, we write each one in turn, incurring the overhead of a system call per byte written. We can fix this with a BufWriter<W>:

use std::io::prelude::*;
use std::io::BufWriter;
use std::net::TcpStream;

let mut stream = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

for i in 0..10 {
    stream.write(&[i+1]).unwrap();
}
stream.flush().unwrap();
Run

By wrapping the stream with a BufWriter<W>, these ten writes are all grouped together by the buffer and will all be written out in one system call when the stream is flushed.

Implementations§

source§

impl<W: Write> BufWriter<W>

source

pub fn new(inner: W) -> BufWriter<W>

Creates a new BufWriter<W> with a default buffer capacity. The default is currently 8 KiB, but may change in the future.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());
Run
source

pub fn with_capacity(capacity: usize, inner: W) -> BufWriter<W>

Creates a new BufWriter<W> with at least the specified buffer capacity.

§Examples

Creating a buffer with a buffer of at least a hundred bytes.

use std::io::BufWriter;
use std::net::TcpStream;

let stream = TcpStream::connect("127.0.0.1:34254").unwrap();
let mut buffer = BufWriter::with_capacity(100, stream);
Run
source

pub fn into_inner(self) -> Result<W, IntoInnerError<BufWriter<W>>>

Unwraps this BufWriter<W>, returning the underlying writer.

The buffer is written out before returning the writer.

§Errors

An Err will be returned if an error occurs while flushing the buffer.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

// unwrap the TcpStream and flush the buffer
let stream = buffer.into_inner().unwrap();
Run
1.56.0 · source

pub fn into_parts(self) -> (W, Result<Vec<u8>, WriterPanicked>)

Disassembles this BufWriter<W>, returning the underlying writer, and any buffered but unwritten data.

If the underlying writer panicked, it is not known what portion of the data was written. In this case, we return WriterPanicked for the buffered data (from which the buffer contents can still be recovered).

into_parts makes no attempt to flush data and cannot fail.

§Examples
use std::io::{BufWriter, Write};

let mut buffer = [0u8; 10];
let mut stream = BufWriter::new(buffer.as_mut());
write!(stream, "too much data").unwrap();
stream.flush().expect_err("it doesn't fit");
let (recovered_writer, buffered_data) = stream.into_parts();
assert_eq!(recovered_writer.len(), 0);
assert_eq!(&buffered_data.unwrap(), b"ata");
Run
source§

impl<W: ?Sized + Write> BufWriter<W>

source

pub fn get_ref(&self) -> &W

Gets a reference to the underlying writer.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

// we can use reference just like buffer
let reference = buffer.get_ref();
Run
source

pub fn get_mut(&mut self) -> &mut W

Gets a mutable reference to the underlying writer.

It is inadvisable to directly write to the underlying writer.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

// we can use reference just like buffer
let reference = buffer.get_mut();
Run
1.37.0 · source

pub fn buffer(&self) -> &[u8]

Returns a reference to the internally buffered data.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let buf_writer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

// See how many bytes are currently buffered
let bytes_buffered = buf_writer.buffer().len();
Run
1.46.0 · source

pub fn capacity(&self) -> usize

Returns the number of bytes the internal buffer can hold without flushing.

§Examples
use std::io::BufWriter;
use std::net::TcpStream;

let buf_writer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());

// Check the capacity of the inner buffer
let capacity = buf_writer.capacity();
// Calculate how many bytes can be written without flushing
let without_flush = capacity - buf_writer.buffer().len();
Run

Trait Implementations§

source§

impl<W> Debug for BufWriter<W>
where W: Debug + ?Sized + Write,

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<W: ?Sized + Write> Drop for BufWriter<W>

source§

fn drop(&mut self)

Executes the destructor for this type. Read more
source§

impl<W: ?Sized + Write + Seek> Seek for BufWriter<W>

source§

fn seek(&mut self, pos: SeekFrom) -> Result<u64>

Seek to the offset, in bytes, in the underlying writer.

Seeking always writes out the internal buffer before seeking.

1.55.0 · source§

fn rewind(&mut self) -> Result<()>

Rewind to the beginning of a stream. Read more
source§

fn stream_len(&mut self) -> Result<u64>

🔬This is a nightly-only experimental API. (seek_stream_len #59359)
Returns the length of this stream (in bytes). Read more
1.51.0 · source§

fn stream_position(&mut self) -> Result<u64>

Returns the current seek position from the start of the stream. Read more
source§

fn seek_relative(&mut self, offset: i64) -> Result<()>

🔬This is a nightly-only experimental API. (seek_seek_relative #117374)
Seeks relative to the current position. Read more
source§

impl<W: ?Sized + Write> Write for BufWriter<W>

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more

Auto Trait Implementations§

§

impl<W: ?Sized> RefUnwindSafe for BufWriter<W>
where W: RefUnwindSafe,

§

impl<W: ?Sized> Send for BufWriter<W>
where W: Send,

§

impl<W: ?Sized> Sync for BufWriter<W>
where W: Sync,

§

impl<W: ?Sized> Unpin for BufWriter<W>
where W: Unpin,

§

impl<W: ?Sized> UnwindSafe for BufWriter<W>
where W: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.