Generic Data Types
We use generics to create definitions for items like function signatures or structs, which we can then use with many different concrete data types. Let’s first look at how to define functions, structs, enums, and methods using generics. Then we’ll discuss how generics affect code performance.
In Function Definitions
When defining a function that uses generics, we place the generics in the signature of the function where we would usually specify the data types of the parameters and return value. Doing so makes our code more flexible and provides more functionality to callers of our function while preventing code duplication.
Continuing with our largest
function, Listing 10-4 shows two functions that
both find the largest value in a slice. We'll then combine these into a single
function that uses generics.
Filename: src/main.rs
fn largest_i32(list: &[i32]) -> &i32 { let mut largest = &list[0]; for item in list { if item > largest { largest = item; } } largest } fn largest_char(list: &[char]) -> &char { let mut largest = &list[0]; for item in list { if item > largest { largest = item; } } largest } fn main() { let number_list = vec![34, 50, 25, 100, 65]; let result = largest_i32(&number_list); println!("The largest number is {}", result); assert_eq!(*result, 100); let char_list = vec!['y', 'm', 'a', 'q']; let result = largest_char(&char_list); println!("The largest char is {}", result); assert_eq!(*result, 'y'); }
The largest_i32
function is the one we extracted in Listing 10-3 that finds
the largest i32
in a slice. The largest_char
function finds the largest
char
in a slice. The function bodies have the same code, so let’s eliminate
the duplication by introducing a generic type parameter in a single function.
To parameterize the types in a new single function, we need to name the type
parameter, just as we do for the value parameters to a function. You can use
any identifier as a type parameter name. But we’ll use T
because, by
convention, type parameter names in Rust are short, often just a letter, and
Rust’s type-naming convention is UpperCamelCase. Short for “type,” T
is the
default choice of most Rust programmers.
When we use a parameter in the body of the function, we have to declare the
parameter name in the signature so the compiler knows what that name means.
Similarly, when we use a type parameter name in a function signature, we have
to declare the type parameter name before we use it. To define the generic
largest
function, place type name declarations inside angle brackets, <>
,
between the name of the function and the parameter list, like this:
fn largest<T>(list: &[T]) -> &T {
We read this definition as: the function largest
is generic over some type
T
. This function has one parameter named list
, which is a slice of values
of type T
. The largest
function will return a reference to a value of the
same type T
.
Listing 10-5 shows the combined largest
function definition using the generic
data type in its signature. The listing also shows how we can call the function
with either a slice of i32
values or char
values. Note that this code won’t
compile yet, but we’ll fix it later in this chapter.
Filename: src/main.rs
fn largest<T>(list: &[T]) -> &T {
let mut largest = &list[0];
for item in list {
if item > largest {
largest = item;
}
}
largest
}
fn main() {
let number_list = vec![34, 50, 25, 100, 65];
let result = largest(&number_list);
println!("The largest number is {}", result);
let char_list = vec!['y', 'm', 'a', 'q'];
let result = largest(&char_list);
println!("The largest char is {}", result);
}
If we compile this code right now, we’ll get this error:
$ cargo run
Compiling chapter10 v0.1.0 (file:///projects/chapter10)
error[E0369]: binary operation `>` cannot be applied to type `&T`
--> src/main.rs:5:17
|
5 | if item > largest {
| ---- ^ ------- &T
| |
| &T
|
help: consider restricting type parameter `T`
|
1 | fn largest<T: std::cmp::PartialOrd>(list: &[T]) -> &T {
| ++++++++++++++++++++++
For more information about this error, try `rustc --explain E0369`.
error: could not compile `chapter10` due to previous error
The help text mentions std::cmp::PartialOrd
, which is a trait, and we’re
going to talk about traits in the next section. For now, know that this error
states that the body of largest
won’t work for all possible types that T
could be. Because we want to compare values of type T
in the body, we can
only use types whose values can be ordered. To enable comparisons, the standard
library has the std::cmp::PartialOrd
trait that you can implement on types
(see Appendix C for more on this trait). By following the help text's
suggestion, we restrict the types valid for T
to only those that implement
PartialOrd
and this example will compile, because the standard library
implements PartialOrd
on both i32
and char
.
In Struct Definitions
We can also define structs to use a generic type parameter in one or more
fields using the <>
syntax. Listing 10-6 defines a Point<T>
struct to hold
x
and y
coordinate values of any type.
Filename: src/main.rs
struct Point<T> { x: T, y: T, } fn main() { let integer = Point { x: 5, y: 10 }; let float = Point { x: 1.0, y: 4.0 }; }
The syntax for using generics in struct definitions is similar to that used in function definitions. First, we declare the name of the type parameter inside angle brackets just after the name of the struct. Then we use the generic type in the struct definition where we would otherwise specify concrete data types.
Note that because we’ve used only one generic type to define Point<T>
, this
definition says that the Point<T>
struct is generic over some type T
, and
the fields x
and y
are both that same type, whatever that type may be. If
we create an instance of a Point<T>
that has values of different types, as in
Listing 10-7, our code won’t compile.
Filename: src/main.rs
struct Point<T> {
x: T,
y: T,
}
fn main() {
let wont_work = Point { x: 5, y: 4.0 };
}
In this example, when we assign the integer value 5 to x
, we let the compiler
know that the generic type T
will be an integer for this instance of
Point<T>
. Then when we specify 4.0 for y
, which we’ve defined to have the
same type as x
, we’ll get a type mismatch error like this:
$ cargo run
Compiling chapter10 v0.1.0 (file:///projects/chapter10)
error[E0308]: mismatched types
--> src/main.rs:7:38
|
7 | let wont_work = Point { x: 5, y: 4.0 };
| ^^^ expected integer, found floating-point number
For more information about this error, try `rustc --explain E0308`.
error: could not compile `chapter10` due to previous error
To define a Point
struct where x
and y
are both generics but could have
different types, we can use multiple generic type parameters. For example, in
Listing 10-8, we change the definition of Point
to be generic over types T
and U
where x
is of type T
and y
is of type U
.
Filename: src/main.rs
struct Point<T, U> { x: T, y: U, } fn main() { let both_integer = Point { x: 5, y: 10 }; let both_float = Point { x: 1.0, y: 4.0 }; let integer_and_float = Point { x: 5, y: 4.0 }; }
Now all the instances of Point
shown are allowed! You can use as many generic
type parameters in a definition as you want, but using more than a few makes
your code hard to read. If you're finding you need lots of generic types in
your code, it could indicate that your code needs restructuring into smaller
pieces.
In Enum Definitions
As we did with structs, we can define enums to hold generic data types in their
variants. Let’s take another look at the Option<T>
enum that the standard
library provides, which we used in Chapter 6:
#![allow(unused)] fn main() { enum Option<T> { Some(T), None, } }
This definition should now make more sense to you. As you can see, the
Option<T>
enum is generic over type T
and has two variants: Some
, which
holds one value of type T
, and a None
variant that doesn’t hold any value.
By using the Option<T>
enum, we can express the abstract concept of an
optional value, and because Option<T>
is generic, we can use this abstraction
no matter what the type of the optional value is.
Enums can use multiple generic types as well. The definition of the Result
enum that we used in Chapter 9 is one example:
#![allow(unused)] fn main() { enum Result<T, E> { Ok(T), Err(E), } }
The Result
enum is generic over two types, T
and E
, and has two variants:
Ok
, which holds a value of type T
, and Err
, which holds a value of type
E
. This definition makes it convenient to use the Result
enum anywhere we
have an operation that might succeed (return a value of some type T
) or fail
(return an error of some type E
). In fact, this is what we used to open a
file in Listing 9-3, where T
was filled in with the type std::fs::File
when
the file was opened successfully and E
was filled in with the type
std::io::Error
when there were problems opening the file.
When you recognize situations in your code with multiple struct or enum definitions that differ only in the types of the values they hold, you can avoid duplication by using generic types instead.
In Method Definitions
We can implement methods on structs and enums (as we did in Chapter 5) and use
generic types in their definitions, too. Listing 10-9 shows the Point<T>
struct we defined in Listing 10-6 with a method named x
implemented on it.
Filename: src/main.rs
struct Point<T> { x: T, y: T, } impl<T> Point<T> { fn x(&self) -> &T { &self.x } } fn main() { let p = Point { x: 5, y: 10 }; println!("p.x = {}", p.x()); }
Here, we’ve defined a method named x
on Point<T>
that returns a reference
to the data in the field x
.
Note that we have to declare T
just after impl
so we can use T
to specify
that we’re implementing methods on the type Point<T>
. By declaring T
as a
generic type after impl
, Rust can identify that the type in the angle
brackets in Point
is a generic type rather than a concrete type. We could
have chosen a different name for this generic parameter than the generic
parameter declared in the struct definition, but using the same name is
conventional. Methods written within an impl
that declares the generic type
will be defined on any instance of the type, no matter what concrete type ends
up substituting for the generic type.
We can also specify constraints on generic types when defining methods on the
type. We could, for example, implement methods only on Point<f32>
instances
rather than on Point<T>
instances with any generic type. In Listing 10-10 we
use the concrete type f32
, meaning we don’t declare any types after impl
.
Filename: src/main.rs
struct Point<T> { x: T, y: T, } impl<T> Point<T> { fn x(&self) -> &T { &self.x } } impl Point<f32> { fn distance_from_origin(&self) -> f32 { (self.x.powi(2) + self.y.powi(2)).sqrt() } } fn main() { let p = Point { x: 5, y: 10 }; println!("p.x = {}", p.x()); }
This code means the type Point<f32>
will have a distance_from_origin
method; other instances of Point<T>
where T
is not of type f32
will not
have this method defined. The method measures how far our point is from the
point at coordinates (0.0, 0.0) and uses mathematical operations that are
available only for floating point types.
Generic type parameters in a struct definition aren’t always the same as those
you use in that same struct’s method signatures. Listing 10-11 uses the generic
types X1
and Y1
for the Point
struct and X2
Y2
for the mixup
method
signature to make the example clearer. The method creates a new Point
instance with the x
value from the self
Point
(of type X1
) and the y
value from the passed-in Point
(of type Y2
).
Filename: src/main.rs
struct Point<X1, Y1> { x: X1, y: Y1, } impl<X1, Y1> Point<X1, Y1> { fn mixup<X2, Y2>(self, other: Point<X2, Y2>) -> Point<X1, Y2> { Point { x: self.x, y: other.y, } } } fn main() { let p1 = Point { x: 5, y: 10.4 }; let p2 = Point { x: "Hello", y: 'c' }; let p3 = p1.mixup(p2); println!("p3.x = {}, p3.y = {}", p3.x, p3.y); }
In main
, we’ve defined a Point
that has an i32
for x
(with value 5
)
and an f64
for y
(with value 10.4
). The p2
variable is a Point
struct
that has a string slice for x
(with value "Hello"
) and a char
for y
(with value c
). Calling mixup
on p1
with the argument p2
gives us p3
,
which will have an i32
for x
, because x
came from p1
. The p3
variable
will have a char
for y
, because y
came from p2
. The println!
macro
call will print p3.x = 5, p3.y = c
.
The purpose of this example is to demonstrate a situation in which some generic
parameters are declared with impl
and some are declared with the method
definition. Here, the generic parameters X1
and Y1
are declared after
impl
because they go with the struct definition. The generic parameters X2
and Y2
are declared after fn mixup
, because they’re only relevant to the
method.
Performance of Code Using Generics
You might be wondering whether there is a runtime cost when using generic type parameters. The good news is that using generic types won't make your program run any slower than it would with concrete types.
Rust accomplishes this by performing monomorphization of the code using generics at compile time. Monomorphization is the process of turning generic code into specific code by filling in the concrete types that are used when compiled. In this process, the compiler does the opposite of the steps we used to create the generic function in Listing 10-5: the compiler looks at all the places where generic code is called and generates code for the concrete types the generic code is called with.
Let’s look at how this works by using the standard library’s generic
Option<T>
enum:
#![allow(unused)] fn main() { let integer = Some(5); let float = Some(5.0); }
When Rust compiles this code, it performs monomorphization. During that
process, the compiler reads the values that have been used in Option<T>
instances and identifies two kinds of Option<T>
: one is i32
and the other
is f64
. As such, it expands the generic definition of Option<T>
into two
definitions specialized to i32
and f64
, thereby replacing the generic
definition with the specific ones.
The monomorphized version of the code looks similar to the following (the compiler uses different names than what we’re using here for illustration):
Filename: src/main.rs
enum Option_i32 { Some(i32), None, } enum Option_f64 { Some(f64), None, } fn main() { let integer = Option_i32::Some(5); let float = Option_f64::Some(5.0); }
The generic Option<T>
is replaced with the specific definitions created by
the compiler. Because Rust compiles generic code into code that specifies the
type in each instance, we pay no runtime cost for using generics. When the code
runs, it performs just as it would if we had duplicated each definition by
hand. The process of monomorphization makes Rust’s generics extremely efficient
at runtime.