Items

Items consist of the set of things permitted at the top level of a module. However, Rust also allows some items to appear within some other types of items, such as within a function. The same formatting conventions apply whether an item appears at module level or within another item.

extern crate statements must be first in a file. They must be ordered alphabetically.

use statements, and module declarations (mod foo;, not mod { ... }) must come before other items. Put imports before module declarations. Version-sort each, except that self and super must come before any other names.

Don't automatically move module declarations annotated with #[macro_use], since that might change semantics.

Function definitions

In Rust, people often find functions by searching for fn [function-name], so the formatting of function definitions must enable this.

The proper ordering and spacing is:

#![allow(unused)]
fn main() {
[pub] [unsafe] [extern ["ABI"]] fn foo(arg1: i32, arg2: i32) -> i32 {
    ...
}
}

Avoid comments within the signature itself.

If the function signature does not fit on one line, then break after the opening parenthesis and before the closing parenthesis and put each argument on its own block-indented line. For example,

#![allow(unused)]
fn main() {
fn foo(
    arg1: i32,
    arg2: i32,
) -> i32 {
    ...
}
}

Note the trailing comma on the last argument.

Tuples and tuple structs

Write the type list as you would a parameter list to a function.

Build a tuple or tuple struct as you would call a function.

Single-line

#![allow(unused)]
fn main() {
struct Bar(Type1, Type2);

let x = Bar(11, 22);
let y = (11, 22, 33);
}

Enums

In the declaration, put each variant on its own line, block indented.

Format each variant accordingly as either a struct (but without the struct keyword), a tuple struct, or an identifier (which doesn't require special formatting):

#![allow(unused)]
fn main() {
enum FooBar {
    First(u32),
    Second,
    Error {
        err: Box<Error>,
        line: u32,
    },
}
}

If a struct variant is small, format it on one line. In this case, do not use a trailing comma for the field list, but do put spaces around each brace:

#![allow(unused)]
fn main() {
enum FooBar {
    Error { err: Box<Error>, line: u32 },
}
}

In an enum with multiple struct variants, if any struct variant is written on multiple lines, use the multi-line formatting for all struct variants. However, such a situation might be an indication that you should factor out the fields of the variant into their own struct.

Structs and Unions

Struct names follow on the same line as the struct keyword, with the opening brace on the same line when it fits within the right margin. All struct fields are indented once and end with a trailing comma. The closing brace is not indented and appears on its own line.

#![allow(unused)]
fn main() {
struct Foo {
    a: A,
    b: B,
}
}

If and only if the type of a field does not fit within the right margin, it is pulled down to its own line and indented again.

#![allow(unused)]
fn main() {
struct Foo {
    a: A,
    long_name:
        LongType,
}
}

Prefer using a unit struct (e.g., struct Foo;) to an empty struct (e.g., struct Foo(); or struct Foo {}, these only exist to simplify code generation), but if you must use an empty struct, keep it on one line with no space between the braces: struct Foo; or struct Foo {}.

The same guidelines are used for untagged union declarations.

#![allow(unused)]
fn main() {
union Foo {
    a: A,
    b: B,
    long_name:
        LongType,
}
}

Tuple structs

Put the whole struct on one line if possible. Separate types within the parentheses using a comma and space. Don't use a trailing comma for a single-line tuple struct. Don't put spaces around the parentheses or semicolon:

#![allow(unused)]
fn main() {
pub struct Foo(String, u8);
}

Prefer unit structs to empty tuple structs (these only exist to simplify code generation), e.g., struct Foo; rather than struct Foo();.

For more than a few fields (in particular if the tuple struct does not fit on one line), prefer a proper struct with named fields.

For a multi-line tuple struct, block-format the fields with a field on each line and a trailing comma:

#![allow(unused)]
fn main() {
pub struct Foo(
    String,
    u8,
);
}

Traits

Use block-indent for trait items. If there are no items, format the trait (including its {}) on a single line. Otherwise, break after the opening brace and before the closing brace:

#![allow(unused)]
fn main() {
trait Foo {}

pub trait Bar {
    ...
}
}

If the trait has bounds, put a space after the colon but not before, and put spaces around each +, e.g.,

#![allow(unused)]
fn main() {
trait Foo: Debug + Bar {}
}

Prefer not to line-break in the bounds if possible (consider using a where clause). Prefer to break between bounds than to break any individual bound. If you must break the bounds, put each bound (including the first) on its own block-indented line, break before the + and put the opening brace on its own line:

#![allow(unused)]
fn main() {
pub trait IndexRanges:
    Index<Range<usize>, Output=Self>
    + Index<RangeTo<usize>, Output=Self>
    + Index<RangeFrom<usize>, Output=Self>
    + Index<RangeFull, Output=Self>
{
    ...
}
}

Impls

Use block-indent for impl items. If there are no items, format the impl (including its {}) on a single line. Otherwise, break after the opening brace and before the closing brace:

#![allow(unused)]
fn main() {
impl Foo {}

impl Bar for Foo {
    ...
}
}

Avoid line-breaking in the signature if possible. If a line break is required in a non-inherent impl, break immediately before for, block indent the concrete type and put the opening brace on its own line:

#![allow(unused)]
fn main() {
impl Bar
    for Foo
{
    ...
}
}

Extern crate

extern crate foo;

Use spaces around keywords, no spaces around the semicolon.

Modules

#![allow(unused)]
fn main() {
mod foo {
}
}

#![allow(unused)]
fn main() {
mod foo;
}

Use spaces around keywords and before the opening brace, no spaces around the semicolon.

`macro_rules!`

Use {} for the full definition of the macro.

#![allow(unused)]
fn main() {
macro_rules! foo {
}
}

Generics

Prefer to put a generics clause on one line. Break other parts of an item declaration rather than line-breaking a generics clause. If a generics clause is large enough to require line-breaking, prefer a where clause instead.

Do not put spaces before or after < nor before >. Only put a space after > if it is followed by a word or opening brace, not an opening parenthesis. Put a space after each comma. Do not use a trailing comma for a single-line generics clause.

#![allow(unused)]
fn main() {
fn foo<T: Display, U: Debug>(x: Vec<T>, y: Vec<U>) ...

impl<T: Display, U: Debug> SomeType<T, U> { ...
}

If the generics clause must be formatted across multiple lines, put each parameter on its own block-indented line, break after the opening < and before the closing >, and use a trailing comma.

#![allow(unused)]
fn main() {
fn foo<
    T: Display,
    U: Debug,
>(x: Vec<T>, y: Vec<U>) ...
}

If an associated type is bound in a generic type, put spaces around the =:

#![allow(unused)]
fn main() {
<T: Example<Item = u32>>
}

Prefer to use single-letter names for generic parameters.

`where` clauses

These rules apply for where clauses on any item.

If immediately following a closing bracket of any kind, write the keyword where on the same line, with a space before it.

Otherwise, put where on a new line at the same indentation level. Put each component of a where clause on its own line, block-indented. Use a trailing comma, unless the clause is terminated with a semicolon. If the where clause is followed by a block (or assignment), start that block on a new line. Examples:

#![allow(unused)]
fn main() {
fn function<T, U>(args)
where
    T: Bound,
    U: AnotherBound,
{
    body
}

fn foo<T>(
    args
) -> ReturnType
where
    T: Bound,
{
    body
}

fn foo<T, U>(
    args,
) where
    T: Bound,
    U: AnotherBound,
{
    body
}

fn foo<T, U>(
    args
) -> ReturnType
where
    T: Bound,
    U: AnotherBound;  // Note, no trailing comma.

// Note that where clauses on `type` aliases are not enforced and should not
// be used.
type Foo<T>
where
    T: Bound
= Bar<T>;
}

If a where clause is very short, prefer using an inline bound on the type parameter.

If a component of a where clause does not fit and contains +, break it before each + and block-indent the continuation lines. Put each bound on its own line. E.g.,

#![allow(unused)]
fn main() {
impl<T: ?Sized, Idx> IndexRanges<Idx> for T
where
    T: Index<Range<Idx>, Output = Self::Output>
        + Index<RangeTo<Idx>, Output = Self::Output>
        + Index<RangeFrom<Idx>, Output = Self::Output>
        + Index<RangeInclusive<Idx>, Output = Self::Output>
        + Index<RangeToInclusive<Idx>, Output = Self::Output>
        + Index<RangeFull>,
}

Type aliases

Keep type aliases on one line when they fit. If necessary to break the line, do so before the =, and block-indent the right-hand side:

#![allow(unused)]
fn main() {
pub type Foo = Bar<T>;

// If multi-line is required
type VeryLongType<T, U: SomeBound>
    = AnEvenLongerType<T, U, Foo<T>>;
}

When there is a trailing where clause after the type, and no where clause present before the type, break before the = and indent. Then break before the where keyword and format the clauses normally, e.g.,

#![allow(unused)]
fn main() {
// With only a trailing where clause
type VeryLongType<T, U>
    = AnEvenLongerType<T, U, Foo<T>>
where
    T: U::AnAssociatedType,
    U: SomeBound;
}

When there is a where clause before the type, format it normally, and break after the last clause. Do not indent before the = to leave it visually distinct from the indented clauses that precede it. If there is additionally a where clause after the type, break before the where keyword and format the clauses normally.

#![allow(unused)]
fn main() {
// With only a preceding where clause.
type WithPrecedingWC<T, U>
where
    T: U::AnAssociatedType,
    U: SomeBound,
= AnEvenLongerType<T, U, Foo<T>>;

// Or with both a preceding and trailing where clause.
type WithPrecedingWC<T, U>
where
    T: U::AnAssociatedType,
    U: SomeBound,
= AnEvenLongerType<T, U, Foo<T>>
where
    T: U::AnAssociatedType2,
    U: SomeBound2;
}

Associated types

Format associated types like type aliases. Where an associated type has a bound, put a space after the colon but not before:

#![allow(unused)]
fn main() {
pub type Foo: Bar;
}

extern items

When writing extern items (such as extern "C" fn), always specify the ABI. For example, write extern "C" fn foo ..., not extern fn foo ..., or extern "C" { ... }.

Imports (`use` statements)

Format imports on one line where possible. Don't put spaces around braces.

#![allow(unused)]
fn main() {
use a::b::c;
use a::b::d::*;
use a::b::{foo, bar, baz};
}

Large list imports

Prefer to use multiple imports rather than a multi-line import. However, tools should not split imports by default.

If an import does require multiple lines (either because a list of single names does not fit within the max width, or because of the rules for nested imports below), then break after the opening brace and before the closing brace, use a trailing comma, and block indent the names.

#![allow(unused)]
fn main() {
// Prefer
foo::{long, list, of, imports};
foo::{more, imports};

// If necessary
foo::{
    long, list, of, imports, more,
    imports,  // Note trailing comma
};
}

Ordering of imports

A group of imports is a set of imports on the same or sequential lines. One or more blank lines or other items (e.g., a function) separate groups of imports.

Within a group of imports, imports must be version-sorted, except that non-lowercase characters (characters that can start an UpperCamelCase identifier) must be sorted before lowercase characters. Groups of imports must not be merged or re-ordered.

E.g., input:

#![allow(unused)]
fn main() {
use d;
use c;

use b;
use a;
}

output:

#![allow(unused)]
fn main() {
use c;
use d;

use a;
use b;
}

Because of macro_use, attributes must also start a new group and prevent re-ordering.

Ordering list import

Names in a list import must be version-sorted, except that:

self and super always come first if present,
non-lowercase characters (characters that can start an UpperCamelCase identifier) must be sorted before lowercase characters, and
groups and glob imports always come last if present.

This applies recursively. For example, a::* comes before b::a but a::b comes before a::*. E.g., use foo::bar::{a, b::c, b::d, b::d::{x, y, z}, b::{self, r, s}};.

Normalisation

Tools must make the following normalisations, recursively:

use a::self; -> use a;
use a::{}; -> (nothing)
use a::{b}; -> use a::b;

Tools must not otherwise merge or un-merge import lists or adjust glob imports (without an explicit option).

Nested imports

If there are any nested imports in a list import, then use the multi-line form, even if the import fits on one line. Each nested import must be on its own line, but non-nested imports must be grouped on as few lines as possible.

For example,

#![allow(unused)]
fn main() {
use a::b::{
    x, y, z,
    u::{...},
    w::{...},
};
}

Merging/un-merging imports

An example:

#![allow(unused)]
fn main() {
// Un-merged
use a::b;
use a::c::d;

// Merged
use a::{b, c::d};
}

Tools must not merge or un-merge imports by default. They may offer merging or un-merging as an option.

The Rust Style Guide