1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382
//! Standard library macros
//!
//! This module contains a set of macros which are exported from the standard
//! library. Each macro is available for use when linking against the standard
//! library.
// ignore-tidy-dbg
#[doc = include_str!("../../core/src/macros/panic.md")]
#[macro_export]
#[rustc_builtin_macro(std_panic)]
#[stable(feature = "rust1", since = "1.0.0")]
#[allow_internal_unstable(edition_panic)]
#[cfg_attr(not(test), rustc_diagnostic_item = "std_panic_macro")]
macro_rules! panic {
// Expands to either `$crate::panic::panic_2015` or `$crate::panic::panic_2021`
// depending on the edition of the caller.
($($arg:tt)*) => {
/* compiler built-in */
};
}
/// Prints to the standard output.
///
/// Equivalent to the [`println!`] macro except that a newline is not printed at
/// the end of the message.
///
/// Note that stdout is frequently line-buffered by default so it may be
/// necessary to use [`io::stdout().flush()`][flush] to ensure the output is emitted
/// immediately.
///
/// The `print!` macro will lock the standard output on each call. If you call
/// `print!` within a hot loop, this behavior may be the bottleneck of the loop.
/// To avoid this, lock stdout with [`io::stdout().lock()`][lock]:
/// ```
/// use std::io::{stdout, Write};
///
/// let mut lock = stdout().lock();
/// write!(lock, "hello world").unwrap();
/// ```
///
/// Use `print!` only for the primary output of your program. Use
/// [`eprint!`] instead to print error and progress messages.
///
/// See [the formatting documentation in `std::fmt`](../std/fmt/index.html)
/// for details of the macro argument syntax.
///
/// [flush]: crate::io::Write::flush
/// [`println!`]: crate::println
/// [`eprint!`]: crate::eprint
/// [lock]: crate::io::Stdout
///
/// # Panics
///
/// Panics if writing to `io::stdout()` fails.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// use std::io::{self, Write};
///
/// print!("this ");
/// print!("will ");
/// print!("be ");
/// print!("on ");
/// print!("the ");
/// print!("same ");
/// print!("line ");
///
/// io::stdout().flush().unwrap();
///
/// print!("this string has a newline, why not choose println! instead?\n");
///
/// io::stdout().flush().unwrap();
/// ```
#[macro_export]
#[stable(feature = "rust1", since = "1.0.0")]
#[cfg_attr(not(test), rustc_diagnostic_item = "print_macro")]
#[allow_internal_unstable(print_internals)]
macro_rules! print {
($($arg:tt)*) => {{
$crate::io::_print($crate::format_args!($($arg)*));
}};
}
/// Prints to the standard output, with a newline.
///
/// On all platforms, the newline is the LINE FEED character (`\n`/`U+000A`) alone
/// (no additional CARRIAGE RETURN (`\r`/`U+000D`)).
///
/// This macro uses the same syntax as [`format!`], but writes to the standard output instead.
/// See [`std::fmt`] for more information.
///
/// The `println!` macro will lock the standard output on each call. If you call
/// `println!` within a hot loop, this behavior may be the bottleneck of the loop.
/// To avoid this, lock stdout with [`io::stdout().lock()`][lock]:
/// ```
/// use std::io::{stdout, Write};
///
/// let mut lock = stdout().lock();
/// writeln!(lock, "hello world").unwrap();
/// ```
///
/// Use `println!` only for the primary output of your program. Use
/// [`eprintln!`] instead to print error and progress messages.
///
/// See [the formatting documentation in `std::fmt`](../std/fmt/index.html)
/// for details of the macro argument syntax.
///
/// [`std::fmt`]: crate::fmt
/// [`eprintln!`]: crate::eprintln
/// [lock]: crate::io::Stdout
///
/// # Panics
///
/// Panics if writing to [`io::stdout`] fails.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// [`io::stdout`]: crate::io::stdout
///
/// # Examples
///
/// ```
/// println!(); // prints just a newline
/// println!("hello there!");
/// println!("format {} arguments", "some");
/// let local_variable = "some";
/// println!("format {local_variable} arguments");
/// ```
#[macro_export]
#[stable(feature = "rust1", since = "1.0.0")]
#[cfg_attr(not(test), rustc_diagnostic_item = "println_macro")]
#[allow_internal_unstable(print_internals, format_args_nl)]
macro_rules! println {
() => {
$crate::print!("\n")
};
($($arg:tt)*) => {{
$crate::io::_print($crate::format_args_nl!($($arg)*));
}};
}
/// Prints to the standard error.
///
/// Equivalent to the [`print!`] macro, except that output goes to
/// [`io::stderr`] instead of [`io::stdout`]. See [`print!`] for
/// example usage.
///
/// Use `eprint!` only for error and progress messages. Use `print!`
/// instead for the primary output of your program.
///
/// [`io::stderr`]: crate::io::stderr
/// [`io::stdout`]: crate::io::stdout
///
/// See [the formatting documentation in `std::fmt`](../std/fmt/index.html)
/// for details of the macro argument syntax.
///
/// # Panics
///
/// Panics if writing to `io::stderr` fails.
///
/// Writing to non-blocking stderr can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// eprint!("Error: Could not complete task");
/// ```
#[macro_export]
#[stable(feature = "eprint", since = "1.19.0")]
#[cfg_attr(not(test), rustc_diagnostic_item = "eprint_macro")]
#[allow_internal_unstable(print_internals)]
macro_rules! eprint {
($($arg:tt)*) => {{
$crate::io::_eprint($crate::format_args!($($arg)*));
}};
}
/// Prints to the standard error, with a newline.
///
/// Equivalent to the [`println!`] macro, except that output goes to
/// [`io::stderr`] instead of [`io::stdout`]. See [`println!`] for
/// example usage.
///
/// Use `eprintln!` only for error and progress messages. Use `println!`
/// instead for the primary output of your program.
///
/// See [the formatting documentation in `std::fmt`](../std/fmt/index.html)
/// for details of the macro argument syntax.
///
/// [`io::stderr`]: crate::io::stderr
/// [`io::stdout`]: crate::io::stdout
/// [`println!`]: crate::println
///
/// # Panics
///
/// Panics if writing to `io::stderr` fails.
///
/// Writing to non-blocking stderr can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// eprintln!("Error: Could not complete task");
/// ```
#[macro_export]
#[stable(feature = "eprint", since = "1.19.0")]
#[cfg_attr(not(test), rustc_diagnostic_item = "eprintln_macro")]
#[allow_internal_unstable(print_internals, format_args_nl)]
macro_rules! eprintln {
() => {
$crate::eprint!("\n")
};
($($arg:tt)*) => {{
$crate::io::_eprint($crate::format_args_nl!($($arg)*));
}};
}
/// Prints and returns the value of a given expression for quick and dirty
/// debugging.
///
/// An example:
///
/// ```rust
/// let a = 2;
/// let b = dbg!(a * 2) + 1;
/// // ^-- prints: [src/main.rs:2] a * 2 = 4
/// assert_eq!(b, 5);
/// ```
///
/// The macro works by using the `Debug` implementation of the type of
/// the given expression to print the value to [stderr] along with the
/// source location of the macro invocation as well as the source code
/// of the expression.
///
/// Invoking the macro on an expression moves and takes ownership of it
/// before returning the evaluated expression unchanged. If the type
/// of the expression does not implement `Copy` and you don't want
/// to give up ownership, you can instead borrow with `dbg!(&expr)`
/// for some expression `expr`.
///
/// The `dbg!` macro works exactly the same in release builds.
/// This is useful when debugging issues that only occur in release
/// builds or when debugging in release mode is significantly faster.
///
/// Note that the macro is intended as a debugging tool and therefore you
/// should avoid having uses of it in version control for long periods
/// (other than in tests and similar).
/// Debug output from production code is better done with other facilities
/// such as the [`debug!`] macro from the [`log`] crate.
///
/// # Stability
///
/// The exact output printed by this macro should not be relied upon
/// and is subject to future changes.
///
/// # Panics
///
/// Panics if writing to `io::stderr` fails.
///
/// # Further examples
///
/// With a method call:
///
/// ```rust
/// fn foo(n: usize) {
/// if let Some(_) = dbg!(n.checked_sub(4)) {
/// // ...
/// }
/// }
///
/// foo(3)
/// ```
///
/// This prints to [stderr]:
///
/// ```text,ignore
/// [src/main.rs:4] n.checked_sub(4) = None
/// ```
///
/// Naive factorial implementation:
///
/// ```rust
/// fn factorial(n: u32) -> u32 {
/// if dbg!(n <= 1) {
/// dbg!(1)
/// } else {
/// dbg!(n * factorial(n - 1))
/// }
/// }
///
/// dbg!(factorial(4));
/// ```
///
/// This prints to [stderr]:
///
/// ```text,ignore
/// [src/main.rs:3] n <= 1 = false
/// [src/main.rs:3] n <= 1 = false
/// [src/main.rs:3] n <= 1 = false
/// [src/main.rs:3] n <= 1 = true
/// [src/main.rs:4] 1 = 1
/// [src/main.rs:5] n * factorial(n - 1) = 2
/// [src/main.rs:5] n * factorial(n - 1) = 6
/// [src/main.rs:5] n * factorial(n - 1) = 24
/// [src/main.rs:11] factorial(4) = 24
/// ```
///
/// The `dbg!(..)` macro moves the input:
///
/// ```compile_fail
/// /// A wrapper around `usize` which importantly is not Copyable.
/// #[derive(Debug)]
/// struct NoCopy(usize);
///
/// let a = NoCopy(42);
/// let _ = dbg!(a); // <-- `a` is moved here.
/// let _ = dbg!(a); // <-- `a` is moved again; error!
/// ```
///
/// You can also use `dbg!()` without a value to just print the
/// file and line whenever it's reached.
///
/// Finally, if you want to `dbg!(..)` multiple values, it will treat them as
/// a tuple (and return it, too):
///
/// ```
/// assert_eq!(dbg!(1usize, 2u32), (1, 2));
/// ```
///
/// However, a single argument with a trailing comma will still not be treated
/// as a tuple, following the convention of ignoring trailing commas in macro
/// invocations. You can use a 1-tuple directly if you need one:
///
/// ```
/// assert_eq!(1, dbg!(1u32,)); // trailing comma ignored
/// assert_eq!((1,), dbg!((1u32,))); // 1-tuple
/// ```
///
/// [stderr]: https://en.wikipedia.org/wiki/Standard_streams#Standard_error_(stderr)
/// [`debug!`]: https://docs.rs/log/*/log/macro.debug.html
/// [`log`]: https://crates.io/crates/log
#[macro_export]
#[cfg_attr(not(test), rustc_diagnostic_item = "dbg_macro")]
#[stable(feature = "dbg_macro", since = "1.32.0")]
macro_rules! dbg {
// NOTE: We cannot use `concat!` to make a static string as a format argument
// of `eprintln!` because `file!` could contain a `{` or
// `$val` expression could be a block (`{ .. }`), in which case the `eprintln!`
// will be malformed.
() => {
$crate::eprintln!("[{}:{}:{}]", $crate::file!(), $crate::line!(), $crate::column!())
};
($val:expr $(,)?) => {
// Use of `match` here is intentional because it affects the lifetimes
// of temporaries - https://stackoverflow.com/a/48732525/1063961
match $val {
tmp => {
$crate::eprintln!("[{}:{}:{}] {} = {:#?}",
$crate::file!(), $crate::line!(), $crate::column!(), $crate::stringify!($val), &tmp);
tmp
}
}
};
($($val:expr),+ $(,)?) => {
($($crate::dbg!($val)),+,)
};
}
#[cfg(test)]
macro_rules! assert_approx_eq {
($a:expr, $b:expr) => {{
let (a, b) = (&$a, &$b);
assert!((*a - *b).abs() < 1.0e-6, "{} is not approximately equal to {}", *a, *b);
}};
}