1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274
//! Operations related to UTF-8 validation.
use crate::mem;
use super::Utf8Error;
/// Returns the initial codepoint accumulator for the first byte.
/// The first byte is special, only want bottom 5 bits for width 2, 4 bits
/// for width 3, and 3 bits for width 4.
#[inline]
const fn utf8_first_byte(byte: u8, width: u32) -> u32 {
(byte & (0x7F >> width)) as u32
}
/// Returns the value of `ch` updated with continuation byte `byte`.
#[inline]
const fn utf8_acc_cont_byte(ch: u32, byte: u8) -> u32 {
(ch << 6) | (byte & CONT_MASK) as u32
}
/// Checks whether the byte is a UTF-8 continuation byte (i.e., starts with the
/// bits `10`).
#[inline]
pub(super) const fn utf8_is_cont_byte(byte: u8) -> bool {
(byte as i8) < -64
}
/// Reads the next code point out of a byte iterator (assuming a
/// UTF-8-like encoding).
///
/// # Safety
///
/// `bytes` must produce a valid UTF-8-like (UTF-8 or WTF-8) string
#[unstable(feature = "str_internals", issue = "none")]
#[inline]
pub unsafe fn next_code_point<'a, I: Iterator<Item = &'a u8>>(bytes: &mut I) -> Option<u32> {
// Decode UTF-8
let x = *bytes.next()?;
if x < 128 {
return Some(x as u32);
}
// Multibyte case follows
// Decode from a byte combination out of: [[[x y] z] w]
// NOTE: Performance is sensitive to the exact formulation here
let init = utf8_first_byte(x, 2);
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let y = unsafe { *bytes.next().unwrap_unchecked() };
let mut ch = utf8_acc_cont_byte(init, y);
if x >= 0xE0 {
// [[x y z] w] case
// 5th bit in 0xE0 .. 0xEF is always clear, so `init` is still valid
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let z = unsafe { *bytes.next().unwrap_unchecked() };
let y_z = utf8_acc_cont_byte((y & CONT_MASK) as u32, z);
ch = init << 12 | y_z;
if x >= 0xF0 {
// [x y z w] case
// use only the lower 3 bits of `init`
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let w = unsafe { *bytes.next().unwrap_unchecked() };
ch = (init & 7) << 18 | utf8_acc_cont_byte(y_z, w);
}
}
Some(ch)
}
/// Reads the last code point out of a byte iterator (assuming a
/// UTF-8-like encoding).
///
/// # Safety
///
/// `bytes` must produce a valid UTF-8-like (UTF-8 or WTF-8) string
#[inline]
pub(super) unsafe fn next_code_point_reverse<'a, I>(bytes: &mut I) -> Option<u32>
where
I: DoubleEndedIterator<Item = &'a u8>,
{
// Decode UTF-8
let w = match *bytes.next_back()? {
next_byte if next_byte < 128 => return Some(next_byte as u32),
back_byte => back_byte,
};
// Multibyte case follows
// Decode from a byte combination out of: [x [y [z w]]]
let mut ch;
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let z = unsafe { *bytes.next_back().unwrap_unchecked() };
ch = utf8_first_byte(z, 2);
if utf8_is_cont_byte(z) {
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let y = unsafe { *bytes.next_back().unwrap_unchecked() };
ch = utf8_first_byte(y, 3);
if utf8_is_cont_byte(y) {
// SAFETY: `bytes` produces an UTF-8-like string,
// so the iterator must produce a value here.
let x = unsafe { *bytes.next_back().unwrap_unchecked() };
ch = utf8_first_byte(x, 4);
ch = utf8_acc_cont_byte(ch, y);
}
ch = utf8_acc_cont_byte(ch, z);
}
ch = utf8_acc_cont_byte(ch, w);
Some(ch)
}
const NONASCII_MASK: usize = usize::repeat_u8(0x80);
/// Returns `true` if any byte in the word `x` is nonascii (>= 128).
#[inline]
const fn contains_nonascii(x: usize) -> bool {
(x & NONASCII_MASK) != 0
}
/// Walks through `v` checking that it's a valid UTF-8 sequence,
/// returning `Ok(())` in that case, or, if it is invalid, `Err(err)`.
#[inline(always)]
#[rustc_const_unstable(feature = "str_internals", issue = "none")]
pub(super) const fn run_utf8_validation(v: &[u8]) -> Result<(), Utf8Error> {
let mut index = 0;
let len = v.len();
let usize_bytes = mem::size_of::<usize>();
let ascii_block_size = 2 * usize_bytes;
let blocks_end = if len >= ascii_block_size { len - ascii_block_size + 1 } else { 0 };
let align = v.as_ptr().align_offset(usize_bytes);
while index < len {
let old_offset = index;
macro_rules! err {
($error_len: expr) => {
return Err(Utf8Error { valid_up_to: old_offset, error_len: $error_len })
};
}
macro_rules! next {
() => {{
index += 1;
// we needed data, but there was none: error!
if index >= len {
err!(None)
}
v[index]
}};
}
let first = v[index];
if first >= 128 {
let w = utf8_char_width(first);
// 2-byte encoding is for codepoints \u{0080} to \u{07ff}
// first C2 80 last DF BF
// 3-byte encoding is for codepoints \u{0800} to \u{ffff}
// first E0 A0 80 last EF BF BF
// excluding surrogates codepoints \u{d800} to \u{dfff}
// ED A0 80 to ED BF BF
// 4-byte encoding is for codepoints \u{1000}0 to \u{10ff}ff
// first F0 90 80 80 last F4 8F BF BF
//
// Use the UTF-8 syntax from the RFC
//
// https://tools.ietf.org/html/rfc3629
// UTF8-1 = %x00-7F
// UTF8-2 = %xC2-DF UTF8-tail
// UTF8-3 = %xE0 %xA0-BF UTF8-tail / %xE1-EC 2( UTF8-tail ) /
// %xED %x80-9F UTF8-tail / %xEE-EF 2( UTF8-tail )
// UTF8-4 = %xF0 %x90-BF 2( UTF8-tail ) / %xF1-F3 3( UTF8-tail ) /
// %xF4 %x80-8F 2( UTF8-tail )
match w {
2 => {
if next!() as i8 >= -64 {
err!(Some(1))
}
}
3 => {
match (first, next!()) {
(0xE0, 0xA0..=0xBF)
| (0xE1..=0xEC, 0x80..=0xBF)
| (0xED, 0x80..=0x9F)
| (0xEE..=0xEF, 0x80..=0xBF) => {}
_ => err!(Some(1)),
}
if next!() as i8 >= -64 {
err!(Some(2))
}
}
4 => {
match (first, next!()) {
(0xF0, 0x90..=0xBF) | (0xF1..=0xF3, 0x80..=0xBF) | (0xF4, 0x80..=0x8F) => {}
_ => err!(Some(1)),
}
if next!() as i8 >= -64 {
err!(Some(2))
}
if next!() as i8 >= -64 {
err!(Some(3))
}
}
_ => err!(Some(1)),
}
index += 1;
} else {
// Ascii case, try to skip forward quickly.
// When the pointer is aligned, read 2 words of data per iteration
// until we find a word containing a non-ascii byte.
if align != usize::MAX && align.wrapping_sub(index) % usize_bytes == 0 {
let ptr = v.as_ptr();
while index < blocks_end {
// SAFETY: since `align - index` and `ascii_block_size` are
// multiples of `usize_bytes`, `block = ptr.add(index)` is
// always aligned with a `usize` so it's safe to dereference
// both `block` and `block.add(1)`.
unsafe {
let block = ptr.add(index) as *const usize;
// break if there is a nonascii byte
let zu = contains_nonascii(*block);
let zv = contains_nonascii(*block.add(1));
if zu || zv {
break;
}
}
index += ascii_block_size;
}
// step from the point where the wordwise loop stopped
while index < len && v[index] < 128 {
index += 1;
}
} else {
index += 1;
}
}
}
Ok(())
}
// https://tools.ietf.org/html/rfc3629
const UTF8_CHAR_WIDTH: &[u8; 256] = &[
// 1 2 3 4 5 6 7 8 9 A B C D E F
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 0
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 1
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 2
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 3
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 4
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 5
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 6
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 7
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // 8
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // 9
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // A
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // B
0, 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, // C
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, // D
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, // E
4, 4, 4, 4, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // F
];
/// Given a first byte, determines how many bytes are in this UTF-8 character.
#[unstable(feature = "str_internals", issue = "none")]
#[must_use]
#[inline]
pub const fn utf8_char_width(b: u8) -> usize {
UTF8_CHAR_WIDTH[b as usize] as usize
}
/// Mask of the value bits of a continuation byte.
const CONT_MASK: u8 = 0b0011_1111;